Lifter (Chain Inside) (LA-8KC)
| เสากั้นเก็บลงดินได้ ประหยัดพื้นที่เก็บ ดีไซน์หรูหรา วัสดุสแตนเลสแท้จากญี่ปุ่น แข็งแรง ไม่เป็นสนิม บำรุงรักษาง่าย Stainless Lifter, Saving Space to Store, Elegant Design, Real Stainless from Japan, Strong, No Rust, Easy to Maintain | |
|
฿0
|
|
Download :
|
|
Saving Space and Time
Pull up Lifter manually when using as barrier, and put it down for opening the space. Therefore no need to take it out and find a space to store.
Image and Design
Upgrade the image of the place to be more luxury. Make the place to be more airy. Can be use in vary occasions.
Good Material and Strong
Cars can be passed without making damage to the product. Product is made from real stainless, difficult to get rust, and easy to clean.
Easy Maintenance
If the product is crashed by car, just remove and change the upper pole, no need to fix the foundation.
Related Information
Example of How to Install
1. Use Electric Jackhammer to cut concrete, size 35 x 35 cm. depth 95 cm. or use coring drill at least size 10" (25 cm.)
2. Remove soil and sand inside to clear the space for Lifter.
3. Put small stones at the bottom of the hole, beneath Lifter. Rain can be flew through the drainage of the bollard.
4. Put Lifter in and check if it is straight or not. Lift the stainless part up to make sure it is not tilted. (should adjust Lifter while the mortar is not in set.) Screw position must be as same position as others, so chain will be straight and balance.
5. Put sand or soil, then lock Lifter with 25 cm. concrete. (See a drawing.)
Pull up Lifter manually when using as barrier, and put it down for opening the space. Therefore no need to take it out and find a space to store.
Image and Design
Upgrade the image of the place to be more luxury. Make the place to be more airy. Can be use in vary occasions.
Good Material and Strong
Cars can be passed without making damage to the product. Product is made from real stainless, difficult to get rust, and easy to clean.
Easy Maintenance
If the product is crashed by car, just remove and change the upper pole, no need to fix the foundation.
- Type Barrier bollard which can be kept underground
- Model Chain inside (2m.), Padlock size 25 mm., Has a reflective sticker
- Material Stainless
- Finishing # 400
- Size ⌀76.3 (t2.0) H700
- Weight 6.6 kg.
- Place Shop, Public Park, Train Station, Hospital
Related Information
Example of How to Install
1. Use Electric Jackhammer to cut concrete, size 35 x 35 cm. depth 95 cm. or use coring drill at least size 10" (25 cm.)
2. Remove soil and sand inside to clear the space for Lifter.
3. Put small stones at the bottom of the hole, beneath Lifter. Rain can be flew through the drainage of the bollard.
4. Put Lifter in and check if it is straight or not. Lift the stainless part up to make sure it is not tilted. (should adjust Lifter while the mortar is not in set.) Screw position must be as same position as others, so chain will be straight and balance.
5. Put sand or soil, then lock Lifter with 25 cm. concrete. (See a drawing.)
วันที่ 14 Feb, 2016 |
ผู้ชม: 14205 |
ID: #183545
Ad Type:
Offering
Attached file:
attachedfile-1680679754.pdf
Attached File2:
attachedfile2-1680679754.dwg